0099001275-00Manual Battery Charger Cargador de Batería Manual Models / Modelos: SE-2254, SE-2352, SE-3000, SE-3612, SE-4020, SE-4022, SE-5025
• 10 •Yellow or Red, but the needle remains steady – Indicates that the battery capacity is not satisfactory. The battery may be either defective or n
• 11 •The Chart MethodUse the following table to more accurately determine the time it will take to bring a battery to full charge. First, identify wh
• 12 •15. TROUBLESHOOTINGPROBLEM POSSIBLE CAUSE REASON/SOLUTIONNo reading on the ammeter.Charger is not plugged in.No power at the receptacle.Clips a
• 13 •PROBLEM POSSIBLE CAUSE REASON/SOLUTIONCharger makes a loud buzz or hum.Transformer laminations vibrate (buzz).Shorted Diode Assembly or Output R
• 14 •If the above solutions do not eliminate the problem or for information about troubleshooting or replacement parts, call toll-free from anywhere
• 2 •IMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL.SAVE THESE INSTRUCTIONS – This manual will show you how to use your charger safely an
• 3 •1.11 To reduce the risk of a battery explosion, follow these instructions and those published by the battery manufacturer and the manufacturer o
• 4 •4. CHARGER LOCATIONRISK OF EXPLOSION AND CONTACT WITH BATTERY ACID.4.1 Locate the charger as far away from the battery as the DC cables permit.
• 5 •7.3 Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +) post of the battery.7.4 Position yourself and the free end of the cable
• 6 •PARTS TOOLS NEEDED(2) 10-32, thread cutting screws(4) ¼-20, thread cutting screws(4) Phillips head sheet metal screws(2) wheels(1) axle(2) axle c
• 7 •10. CONTROL PANELNote: Not all controls are available on all models.Charge Rate Selector Switch Use the Charge Rate selector switch to select th
• 8 •Battery Load Tester Switch (Model SE-8050 only) When testing a battery, use this switch to apply a load to it.Battery Tester Switch (Models SE-22
• 9 •Using the Engine Start feature Your battery charger can be used to jumpstart your car if the battery is low. Follow these instructions on how to
Comments to this Manuals