Schumacher Electric SE-1275A Operations Instructions

0099001430-00Models / Modelos:SE-125A, SE-1275A, SE-1510MA, SE-2151MA, SE-40MAP, SE-520MA, SE-5212A, SE-70MA Automatic Battery Charger Cargador de bat

CONTENTSIMPORTANT SAFETY INSTRUCTIONS ...4PERSONAL SAFETY PRECAUTION

 4 1. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS.1.1 SAVE THESE INSTRUCTIONS – This manual contains important safety and operating ins

 5 3. PREPARING TO CHARGE3.1 If necessary to remove battery from vehicle to charge, always remove sure a

 6 7. FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLEA SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION. TO REDUCE THE RISK OF A SPARK NEAR

 7 display the battery’s state of charge. For this reason, you should depend on the FULL CHARGE LED indicator.BATTERY TYPE SWITCHUse this switch to

 8 MAINTAIN MODE (FLOAT-MODE MONITORING)When the FULL CHARGE (green) LED is lit, the charger has started Maintain Mode. In this mode, the charger k

 9 13. MAINTENANCE AND CAREA minimal amount of care can keep your battery charger working properly for years.Clean the clamps each time you are 

 10 PROBLEM POSSIBLE CAUSE REASON/SOLUTIONShort or no start cycle when cranking engine.Drawing more than the Engine Start rate.Failure to wait 3 min