Schumacher Electric DY-1420 Owner's Manual

0099001066-01Voltage: 12Amperage: 2, 20, 55Manual Battery Charger Model: DY-1420OWNER’S MANUALREAD THE ENTIRE MANUAL BEFORE USING THIS PRODUCT. FAILU

• 9 •PROBLEM POSSIBLE CAUSE REASON/SOLUTIONShort or no start cycle when cranking engine.Drawing more than the Engine Start rate.Failure to wait 6 minu

• 10 •Manufacturer does not provide any warranty for any accessories used with this product that are not manufactured by Schumacher Electric Corporati

• 11 •

• 12 •1 YEAR LIMITED WARRANTY PROGRAM REGISTRATIONMODEL:___________________ DESCRIPTION:___________________________ This is the only express limi

• 1 •IMPORTANT: READ AND SAVE THIS SAFETY AND INSTRUCTION MANUAL.SAVE THESE INSTRUCTIONS – This manual will show you how to use your charger safely an

• 2 •RISK OF EXPLOSIVE GASES.WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS 1.10 DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTER

• 3 •Determine the voltage of the battery by referring to the vehicle owner’s manual and 3.6 make sure that the output voltage selector switch is set

• 4 •FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLE7. A SPARK NEAR THE BATTERY MAY CAUSE A BATTERY EXPLOSION. TO REDUCE THE RISK OF A SPARK NEAR T

• 5 •Attach the Foot:9.2 Remove the charger from the packing materials and place upside down on a at surface. Attach the foot and secure it with th

• 6 •20A Rapid and 55A Boost Charge Rate• – Use for charging automotive, marine and deep-cycle batteries. Not intended for industrial applications.1

• 7 •CALCULATING CHARGE TIME12. Find your battery’s rating on the chart below, and note the charge time given for each charger setting. The times give

• 8 •PROBLEM POSSIBLE CAUSE REASON/SOLUTIONNo reading on the ammeter. Charger is not plugged in.No power at the receptacle.Clips are not making a good